Spouses' Night, Presentation will be given by Dr. George Huang and WSU students, Topic: MAV (Micro Air Vehicles), "From Insects to MAV - The Next Grand Challenge in Aerodynamic Designs, Location: Brandeberry Conference Room (Room 292 Joshi Center), Wright State University. There will be a Short Executive Committee Meeting at 5:30 pm (click here for details)
Joint Meeting with SAMPE, Presentation will be given by Tia Benson-Tolle, AFRL, Topic: TBD, Location: TBD. There will be a Short Executive Committee Meeting at 5:30 pm (click here for details)
ASM Trustee Visit, Presentation will be given by TBD, Topic: TBD, Location: TBD. There will be a Short Executive Committee Meeting at 5:30 pm (click here for details)
Presentation will be given by Kumar Jata, Topic: TBD, Location: TBD. There will be a Short Executive Committee Meeting at 5:30 pm (click here for details)
Dr. Charles M Woods - CMW Technologies LLC - "Specialty Steel Where Are We Now", Location: Fox's Pizza Den, 17 North Xenia Drive, Enon, OH 45323-1019, (937) 864-3663, Meeting Begins at 5:30 pm, Dinner at 6:00 pm, Presentation at 7:00 pm. There will be a Short Executive Committee Meeting at 5:00 pm (click here for details)
Wright State University Students Night, Presentations will be given by several WSU Students, Location: Joshi Center Atrium, Wright State University. There will be a Short Executive Committee Meeting at 5:30 pm (click here for details)
Presentation will be given by Murali Gorantla and Megna Shah, UES, Robomet Development, Location: TBD. There will be a Short Executive Committee Meeting at 5:30 pm (click here for details)
Presentation will be given by Bob Ware, AFRL, Topic: TBD, Location: TBD. There will be a Short Executive Committee Meeting at 5:30 pm (click here for details)
Joint Meeting with ASM-Cincinnati and AWS-Dayton, Presentation will be given by Dave Mahaffey, AFRL, Topic: Solid State Joining of Nickel Base Superalloys, Location: The Engineers Club', Dayton, OH. There will be a Short Executive Committee Meeting at 5:30 pm (click here for details)
ASM Dayton and ASM Cincinnati Present the 5th Annual Critz Classic Golf Outing at Shaker Run Golf Club. Four man team Scramble Event. Lots of Prizes and Dinner Afterwards. Tee Time 1:30 PM. Come join us for some fun. (click here for details)
Dr. Kathy Stevens, Director, Materials & Manufacturing Directorate, Air Force Research Laboratory, Wright-Patterson AFB, OH, Location: Holiday Inn, 2800 Presidential Drive, Fairborn, OH 45324. Phone: (937) 426-7800. Starting time 5:30 pm. You must make a reservation by Friday, May 13, 2011. Contact is Dan Young, Email: daniel.young@wright.edu MAKE YOUR RESERVATION BY FRIDAY May 13. (click here for details)
Dr. Mark F Smith FASM - Sandia National Laboratories, Albuquerque, NM "Dr. Smith is the PRESIDENT of ASM International and will be visiting us and providing a presentation entitled "Enabling Science and Technology for National Security Applications", Location: The Engineering Club, Dayton, Ohio. Starting time 5:30 pm. You must make a reservation by April 8, 2011. Contact is Emil Lesner, Email: emilswork@yahoo.com Phone: 937-541-6201. MAKE YOUR RESERVATION BY FRIDAY APRIL 8. Set this date aside for a chance to meet and visit with our ASM International President. (click here for details)
The ASM-International Dayton Chapter is co-sponsoring the Digital Part Manufacturing workshop organized by SAMPE-Midwest Chapter. The event will take place on March 29 and 30 at Wright State University. If you wish to attend the workshop, please register by March 22. The link to details regarding the agenda and registration is given here and on the description page. http://www.midwestsampe.org/?u=/content/pages/events/20110329&t=1 (click here for details)
Dr. Mark A. James - Alcoa Technical Center, Alcoa Center, PA, "Manage the Impact of Bulk Residual Stress on the Design-Build-Sustain Process for Primary Aircraft Structure", Location: The Engineers Club, Dayton OH (click here for details)
Detailed information for each meeting will be provided here as it becomes available. Use this list to mark your schedule for the dates and place of each meeting. (click here for details)
Robert L. Rapson, Chief Engineer, AFRL/RX, "Systems Engineering in an Air Force Laboratory", Location: UES Building, 4401 Dayton – Xenia Road, Dayton OH (click here for details)
First Meeting of the New Year, Casey Holycross, Wright State University . "The influence of TiB on Fatigue Strength and Microstructural Damage Under Cyclic Loading of a Powder-Metallurgy Forging with Nominal Composition Ti-6Al-4V-1B", Location: China Garden Buffet, Airway Shopping Center, 112 Woodman Dr., Dayton OH (937) 781 9999 (click here for details)
ASM Canton-Massillon Presents Advanced Topics in Steel, with University Emeritus Professor Dr. George Krauss, Colorado School of Mines. Location: McKinley Grand Hotel, 320 Market Avenue South, Canton, OH 44702 (click here for details)
ASM Dayton and ASM Cincinnati Present the 4th Annual Critz Classic Golf Outing at Shaker Run Golf Club. Four man team Scramble Event. Lots of Prizes and Dinner Afterwards. Tee Time 1:30 PM. Come join us for some fun. (click here for details)
There will be a special Joint ASM-Wright State University Seminar at Wright State University. Topic will be: Hydrogenated Diamond like Carbon HDLC – A multifunctional material for Technological Applications. Presented by: Dr. Nihar Ranjan Ray, Professor, Plasma Physics Division, Saha Institute of Nuclear Physics. (click here for details)
The Postponed February Meeting will be held at Bullwinkles, 19 North Main Street, Miamisburg, Ohio 45342, 937.859.7677. The speaker is William R. Rossey Jr. - GE Aviation. 5:30 – 6:00: Social hour followed by dinner, 7:00: Presentation by William R. Rossey Jr., MPED- Failure Investigations, SS Norway Boiler Rupture (click here for details)
It is with my deepest regrets that I have to announce the passing on of one of our best and most active ASM members. Kurt was a good friend and a mentor to all. He was our Chair from 1989 to 1990. Kurt Passed away on Friday, January 22, 2010 from a recent illness. He will be genuinely missed by all of us. Kurt's Obituary and services information can be found here. (click here for details)
The January Meeting will be held at The Engineer's Club, Dayton, OH. The speaker is Jim Hannahs, a retired Assistant Professor at Edison Community College, teaching in Mechanical Engineering and Welding Technology. 5:30 – 6:00: Social hour followed by dinner, 7:00: Presentation by Jim Hannahs, Failure Analysis of a Transfer Pipe at a Brewery (click here for details)
The December Meeting will be held at The Engineer's Club, Dayton, OH. The speaker is Dr. Daniel Eylon, Professor and Director, Graduate Materials Engineering, University of Dayton. 5:30 – 6:00: Social hour followed by dinner, 7:00: Presentation by Dr. Daniel Eylon, ANCIENT ARTS OF SWORD-MAKING or: FROM THE CUTTING-EDGE OF ANCIENT SWORDS TO THE CUTTING-EDGE OF AEROSPACE MATERIALS (click here for details)
The October Meeting will be held at BD’s Mongolian Grill in the Greene, Beavercreek, OH. The speaker is Dr. A. G. Jackson, Materials Science and Engineering, Wright State University. 5:30 – 6:00: Social hour followed by dinner, 7:00: Presentation by Dr. A. G. Jackson, Origins of Coins and Ancient Metals (click here for details)
The first meeting of the ASM-Dayton chapter for 2009-2010 will take place on September 17, 2009 at the Amber Rose restaurant at 1400 Valley Street, Dayton OH. The speaker is Chris Small, President of American Testing Services. 5:30 – 7:00: Social hour followed by dinner, 7:00: Presentation by Chris Small (click here for details)
ASM International is a society whose mission is to gather, process and disseminate technical information. ASM fosters the understanding and application of engineered materials and their research, design, reliable manufacture, use and economic and social benefits.
The Dayton local chapter is made up of about 400 members and serves the materials community of the Dayton area. Our local chapter holds monthly dinner meetings (non-members welcome) with an invited technical speaker, facility tour, or special presentation. Our chapter brings together people from many different backgrounds and specialties expanding our members intellectual and professional horizons as well as their network of contacts with local universities, businesses, industries, and government laboratories.
Additional information about the Dayton Chapter of ASM can be obtained by contacting our Chapter Secretary:
Dr. Charles M. Woods, cwoods@globalms.com, (937) 732-8556
or by mail:
ASM International Dayton Chapter
140 E. Monument Ave
Dayton, OH 45402